Pinch or double-tap the photo to zoom
Front Lips · SKU BB997FL11
Porsche 997.1 Carrera GT3TEK Aero I Front Lip – Narrow Body (2005–2008)
4.9 · 31 reviews- Made to order in Newport Beach, California
- Free US shipping over $[X] / flat freight on bumpers
- 30-day returns, unpainted
- Lifetime crack warranty on polyurethane
Questions? Talk to a 911 owner: (619) 690-5081
- Material
- Flexible, crack-resistant polyurethane
Full product description
Product Details
Our GT3TEK Aero I lip for the narrow-body 997.1 Carrera. It gives the front end a lower, more purposeful stance and cuts lift at speed, without altering the factory bumper.
Molded in flexible GT3TEK polyurethane, not fiberglass. It flexes over driveways, curbs and debris and returns to shape instead of cracking, which is why it survives a daily-driven car.
| Material | Flexible, crack-resistant polyurethane |
| Finish | Raw black, ready for scuff, prime and paint |
| Mounting | 3M automotive tape pre-applied; hardware included, drilling optional |
| In the box | GT3TEK Aero I front lip, mounting hardware, installation guide |
| Made in | Built to order in Southern California |
| Shipping | In stock: ships in 24–48 hours. Backorder: 3–8 business days. |
Fitment Guide
This lip is cut for the standard 997.1 narrow-body front bumper. That is the only bumper it mounts to — the factory aero, Turbo and race bumpers have a different lower edge.
Fits
- ✓Porsche 911 997.1 Carrera / Carrera S, 2005–2008, narrow body, with the standard factory front bumper
Does not fit
- ✗Factory Aerokit I / II cars — different bumper, different lower profile
- ✗997 Turbo — wide-body bumper
- ✗997.1 GT3, GT3 RS, GT2 — factory race bumpers
- ✗997.2, 2009–2012 — facelift bumper. Use the 997.2 front lip →
Install & Paint
Mounting
The lip arrives with 3M automotive tape already applied. The tape holds on its own — drilling is optional. Hardware is included if you or your installer prefer mechanical fasteners as well.
Test fit the lip on the car before any paint work, clean the bumper edge so the tape bonds to a dry, wax-free surface, and press the lip firmly along its full length.
Paint
The part ships in raw black and unpainted — scuff, prime and paint it in your factory or custom color. Any body shop can match it to your car; polyurethane takes paint the same way a flexible bumper cover does.
Who should install it
DIY-capable with basic tools and patience. A shop will get the tightest, most even gap, and most owners have it done while the part is being painted.
FAQ
Does it come painted?
No. It arrives in raw black, ready for scuff, prime and paint in your color.
Do I have to drill my bumper?
No. The 3M tape is pre-applied and holds on its own. Hardware is in the box if your installer wants to add fasteners.
How do I know which bumper I have?
Send us a straight-on photo of your front bumper and we’ll confirm it before you order — call 619-690-5081 or email contact@betterbodiesmotorsport.com.
How is this different from the GT3-style lip?
Same car, different profile. The Aero I is our own GT3TEK design; the GT3-style lip follows the factory GT3 shape. Both mount to the standard 997.1 bumper.
Will it crack on driveways?
Polyurethane flexes and returns to shape instead of shattering, which is why we mold these in urethane rather than fiberglass. It is still a low part — take driveways at an angle.
When does it ship?
In-stock orders leave our California shop in 24–48 hours. Backordered parts run 3–8 business days before shipping.
-
01
Test-fit first
Offer the part up to the car before any prep or paint. Returns are accepted unpainted only, so confirm the fit first.
-
02
Prep the surface
Scuff with a fine grit, clean with a plastic-safe degreaser and lay down an adhesion promoter suited to the material.
-
03
Paint to match
On polyurethane, have your painter add flex additive to primer and color so the finish moves with the part.
-
04
Mount & check gaps
Fit to the bumper, check the panel gaps side to side, then secure. A body shop gets you a factory-match finish.
Stuck mid-install? Call a 911 owner on our team: (619) 690-5081
- Brand
- BetterBodies Motorsport
- Category
- Front Lips
- Chassis
- Porsche 997
- SKU
- BB997FL11
- Material
- Flexible, crack-resistant polyurethane
- Finish
- Ships unpainted, ready for prep & paint
- Made in
- Newport Beach, California
Will this fit my car?
Each part is shaped for one chassis and year range, listed in the title and the Fitment tab. If your car is modified or a changeover year, call us before you order and we'll confirm it.
Does it arrive painted?
No. It ships unpainted so your body shop can color-match it to your car. Test-fit before painting, because returns are accepted unpainted only.
Can I install it myself?
Plenty of owners do. Follow the Install & paint steps, and lean on a professional body shop for a flawless, factory-match finish.
How fast does it ship?
Every part is made to order in Newport Beach, California. US shipping is free over $[X], and bumpers ship at a flat freight rate.
Owner reviews
Driven, fitted, reviewed
Based on 31 reviews
Verified owner reviews will appear here.
Why polyurethane
Built to flex, not to crack.
Low aero lives inches off the road. We mold ours in Newport Beach from flexible polyurethane, so it shrugs off the driveways and speed bumps that split fiberglass.
Polyurethane
Fiberglass
On impact
Flexes and springs back
Rigid, cracks or chips
Driveways & bumps
Built to take the scrape
One hit can mean a repair
Fit out of the box
Molded to factory lines
Often trimmed and filled
Long term
Lifetime crack warranty
Filler, sanding, repaint
$525.00
